Print not sticking to bed

Print not sticking to bed

Issue/Title

Print not sticking to bed



Example Image / Graphic




Issue Details

Insufficient bed adhesion



Cause 1

Bed is not level



Suggested Solutions 1

  1. Level bed

  2. Reduce print speed (first layer speed)



Cause 2

Incorrect nozzle calibration/offset



Suggested Solutions 2

  1. Adjust nozzle height

  2. Adjust first layer height (Use baby-stepping to ensure proper first layer height)



Cause 3

Improper bed surface or settings for filament



Suggested Solutions 3

  1. Change bed surface (glass/tape/BuildTak)

  2. Use adhesives (tape/glue/hairspray)

  3. Adjust bed temperature (for some materials)

  4. Adjust extrusion temperature

  5. Pro Tip - Use raft and brim


    • Related Articles

    • FDM 3D PRINTING PROBLEMS: MY PRINT FAILED

      things were looking great, but for some inexplicable reason, the print has failed. It didn’t stick to the bed, or the filament just stopped extruding — regardless, this type of 3D printing problem could be one of many things Extrusion Stopped ...

    • FDM 3D PRINTING PROBLEMS: MY PRINT LOOKS BAD

      It’s successfully finished, but the 3D printing gods frown upon your ugly print. Here are the 3D printing problems which could be the cause. First Layer is Messy: What’s the 3D Printing Problem? The first layers of a print can often prove ...

    • FDM 3D PRINTING PROBLEMS: NOTHING IS PRINTING

      Try as you might, your print just refuses to get off the ground. No filament extrudes from your hot end; the possible causes for this type of 3D printing problem are numerous. 3D PRINTING TROUBLESHOOTING COMMON 3D PRINTING PROBLEMS Out of Filament: ...

    • Not extruding at the start of the print

      Issue/Title Not extruding at the start of the print Example Image / Graphic Issue Details Print grooves left in bed with no filament and/or flaky or intermittent lines of filament on the first and subsequent layers Cause 1 Incorrect extruder ...

    • Ender 6 User Man

      V1.3 V轮松紧度调节 Before starting up, please check the tightness of the V wheel. V wheel leveling X/Y axis V wheel adjustment: Z轴V轮调节： X/Y轴V轮调节： Z axis V wheel adjustment: Adjustable eccentric isolation column Notes 笔记 18F www.cxsw3d.com 服务热线：400 6133 882 ...